Kay Adams billion electric hydraulic unloading platform provides a safe, professional, perfect and humanized design of equipment for the customer, as a transitional equipment loading and unloading platform and truck loading area, the equipment can be in a flat truck

Enter and unload goods on a flat surface, loading and unloading goods. The complete electro hydraulic unloading platform consists of an integral hydraulic system, an integral mesa structure, a loose leaf flap structure, an open base, a safety foot side shield, and two standard guards

Rubber bumping is produced according to EN1398 standard. Hydraulic unloading platform is the most common and widely used unloading platform, with stable performance, simple operation, stable operation, low maintenance rate and simple repair. platform

Material & surface treatment of main structure parts are made of high strength steel patterns and profiles closely welding, surface skeleton with special "I" made of steel, so that the surface stress is more uniform, and reduce the torque than the skeleton,

The traditional channel steel increases the bearing capacity by 2 times, and it is more durable. The steel structure is subjected to strict shot blasting, rust removing and surface treatment without any spatter and slag. All steel components have been primed with two primers and two finishes

With high quality polyurethane finish and varnish, the film thickness is not less than 0.08mm, need to be dried; standard topcoat is made of blue RAL5010.

Product structure and technical performance:

1., the platform structure adopts the whole platform surface structure design, and the surface adopts high strength tensile pattern plate table panel. The bottom frame of the panel adopts the unique "I" steel support structure, which can effectively distribute the force and reduce the torsion of the skeleton. Table static load from 8 tons to the maximum 15 tons, dynamic load from 5 tons to 10 tons maximum.

2.. The open loose leaf joint structure is made of high tensile figured steel plate and is connected by a high strength galvanized shaft steel with a diameter of 25-30mm (1 "-1.2"). Compared with the traditional tubular welded joint, the open type loose leaf joint increases the welding area by 300%, and the force area increases by more than 2.5 times, so that the loose leaf binder increases the supporting force as high as 4 times, and is easier to maintain.

3., open base, easy pit cleaning and routine maintenance.

The 4. power unit is composed of an integral hydraulic system and a hydraulic pump station. The power unit is installed on the base of the unloading platform, and the installation position is higher than the plane of the pit, so as to keep away from garbage and sundries.

5. power configuration, we can provide two types of power configuration for customers to choose from: 380V/50Hz/0.75Kw and 220V/50Hz/1.1Kw, are equipped with built-in anti overload motor.

6. integral hydraulic system, the inner diameter of the main cylinder is 63mm (2-1/2), and the inner diameter of the auxiliary cylinder is 50mm (2). Suitable for 40 degrees Celsius (100 degrees Fahrenheit) ambient temperature. The single pipe connection prolongs the life of the fully sealed hydraulic system and hydraulic pump station and reduces maintenance costs.

7. control panel push button switch, easy to operate. Interlocking devices are installed between the berths to further enhance safety.

8 independent outtriger patent design 28 tons (60600lbs.) supporting leg structure in unloading process, when the truck suddenly left the platform unloading area, the supporting legs can make goods and keep the forklift in the horizontal plane, to minimize accidents and guarantee the safety of operators.

9 anti pinch design of unloading platform on both sides of anti pinch foot guard, border with yellow / black stripes warning, even rose to the highest in the large area, but also to ensure the side of the side plate is completely closed, which can effectively avoid the risk of a bruised toe, can make the person, forklift, goods with full protection.

10. assembly, maintenance, support rod, unloading platform with assembly support rod, so as to support the unloading platform during equipment maintenance or pit cleaning, and ensure the safety of operation personnel on the platform.

11., floating adjustment, when loose leaf small pull in the end of the truck can be vertical deflection, the adjustment range is within 100mm (4).

12. front end of the anti-collision rubber unloading platform is equipped with two heavy duty anti-collision adhesive. The models are B300-250F, 250mm, x, 300mm (10, x 12).

Product structure and technical performance:

1., the platform structure adopts the whole platform surface structure design, and the surface adopts high strength tensile pattern plate table panel. The bottom frame of the panel adopts the unique "I" steel support structure, which can effectively distribute the force and reduce the torsion of the skeleton. Table static load from 8 tons to the maximum 15 tons, dynamic load from 5 tons to 10 tons maximum.

2.. The open loose leaf joint structure is made of high tensile figured steel plate and is connected by a high strength galvanized shaft steel with a diameter of 25-30mm (1 "-1.2"). Compared with the traditional tubular welded joint, the open type loose leaf joint increases the welding area by 300%, and the force area increases by more than 2.5 times, so that the loose leaf binder increases the supporting force as high as 4 times, and is easier to maintain.

3., open base, easy pit cleaning and routine maintenance.

The 4. power unit is composed of an integral hydraulic system and a hydraulic pump station. The power unit is installed on the base of the unloading platform, and the installation position is higher than the plane of the pit, so as to keep away from garbage and sundries.

5. power configuration, we can provide two types of power configuration for customers to choose from: 380V/50Hz/0.75Kw and 220V/50Hz/1.1Kw, are equipped with built-in anti overload motor.

6. integral hydraulic system, the inner diameter of the main cylinder is 63mm (2-1/2), and the inner diameter of the auxiliary cylinder is 50mm (2). Suitable for 40 degrees Celsius (100 degrees Fahrenheit) ambient temperature. The single pipe connection prolongs the life of the fully sealed hydraulic system and hydraulic pump station and reduces maintenance costs.

7. control panel push button switch, easy to operate. Interlocking devices are installed between the berths to further enhance safety.

8 independent outtriger patent design 28 tons (60600lbs.) supporting leg structure in unloading process, when the truck suddenly left the platform unloading area, the supporting legs can make goods and keep the forklift in the horizontal plane, to minimize accidents and guarantee the safety of operators.

9 anti pinch design of unloading platform on both sides of anti pinch foot guard, border with yellow / black stripes warning, even rose to the highest in the large area, but also to ensure the side of the side plate is completely closed, which can effectively avoid the risk of a bruised toe, can make the person, forklift, goods with full protection.

10. assembly, maintenance, support rod, unloading platform with assembly support rod, so as to support the unloading platform during equipment maintenance or pit cleaning, and ensure the safety of operation personnel on the platform.

11., floating adjustment, when loose leaf small pull in the end of the truck can be vertical deflection, the adjustment range is within 100mm (4).

12. front end of the anti-collision rubber unloading platform is equipped with two heavy duty anti-collision adhesive. The models are B300-250F, 250mm, x, 300mm (10, x 12).

Operation instructions:

When the truck is parked in place, the operator continues to press the button on the control box, and when the ramp rises to the highest point, the extension plate opens automatically. When the control button is released, the work platform of the loading and unloading platform is automatically lowered until the extension plate is lapped to the rear of the truck, and the loading and unloading operation can begin at this time.

The design platform remains flush with a pit tail, effective compensation when loading and unloading carriage bottom slope was 100mm and the maximum guarantee is connected with the tail of the solid pit. Loose leaf small board can be retracted in case of collision.

Optional configuration:

It can be designed and manufactured according to customer's requirements.

The integrated control system can be provided, which can be combined with an industrial door, a sliding door or a fast door, and interlocked.

The side can provide a rubber strip and a brush seal to ensure the overall sealing performance of the height adjustment plate.

Rubber type collision block can be equipped with laminated anti-collision blocks.

Unloading platform small board, standard specification is 400mm, can provide the length of 450mm, 500mm non-standard products.