The electrically retractable landing platform is the latest type of unloading platform. The large platform is lifted by the main oil cylinder, and the auxiliary oil cylinder is pushed out by the telescopic tongue plate and the weight of the unloading platform is lowered, and the tongue plate is taken to the vehicle

Rear of car. The complete retractable landing platform comprises an integral hydraulic system, an integral mesa structure, a retractable tongue panel structure, an open base, a safety foot side shield, and two standard adhesive blocks, all in accordance with the EN139

8 standard production. Retractable unloading platform is the most common and widely used unloading platform, with stable performance, simple operation, stable operation, low maintenance rate and simple repair.

Platform material & surface treatment

The main structural parts are made of high quality, high strength pattern steel plate and profile welded tightly. The table frame is made of special I steel, which makes the table surface force more uniform and reduces the torsion of the skeleton. It is more traditional than the traditional one

The channel steel increases the bearing capacity by 2 times, and it is more durable. The steel structure is subjected to strict shot blasting, rust removing and surface treatment without any spatter and slag. All steel components have been primed with two primers and two finishes,

And the use of high-quality polyurethane finish and varnish, paint thickness of not less than 0.08mm, need drying treatment; standard topcoat using blue RAL5010.

Operation instructions:

The retractable landing platform can be equipped with several different control boxes. The basic control box has 3 buttons: the button 1 promotes the platform; the button 2 extends out the small pull; the button 3 retracts the small wrench. The length of the small wrench can be found in it

The flexibility of the work range, and this superior characteristics for the handling of goods provided good conditions. When loading and unloading the goods, the platform and the small truck will automatically adjust the height of the truck according to the floating. The basic control box can be matched with one button type

Restore button, just press the restore button, the unloading platform is reset to its original position. The integrated control box (optional) incorporates an integrated microprocessor that allows the unloading platform to be connected to the gate, door, and signal

The system is connected with each other so as to form a complete mooring system. The control box is equipped with one button restore button.

Product structure and technical performance:

1. platform structure

The overall platform surface structure design is adopted, and the surface is made of high strength decorative checkered plate. The bottom frame of the panel adopts the unique I steel support structure, which can effectively decompose the distribution of force and reduce the torsion of the frame, so it is more durable.

2. telescopic small pull structure

The standard small wrench is made of high tensile drawing steel plate; the telescopic small plate is pushed by an independent small oil cylinder; the operation is simple and the operation is smooth.

3. open base

The open base structure is easy for pit cleaning and routine maintenance.

4. power unit

The utility model is composed of an integral hydraulic system and a hydraulic pump station, and is arranged on the base of the unloading platform, and the installation position is higher than the plane of the pit, and the utility model is far away from garbage and sundries.

5. power configuration

We offer two power configurations for customers to choose from: 380V/50Hz/0.75Kw and 220V/50Hz/1.1Kw, all equipped with built-in anti overload motors.

6. in one hydraulic system

The inner diameter of the two main cylinders is 63mm (2-1/2), and the inner diameter of the auxiliary cylinder is 50mm (2). Suitable for 40 degrees Celsius (100 degrees Fahrenheit) ambient temperature. The single pipe connection prolongs the life of the fully sealed hydraulic system and hydraulic pump station and reduces maintenance costs.

7. independent outrigger structure

28 tons of patented design (60600lbs.) support leg structure in unloading process, when the truck suddenly left the platform unloading area, the supporting legs can make goods and keep the forklift in the horizontal plane, to minimize accidents and guarantee the safety of operators.

8. anti pinch foot design

The unloading platform on both sides of the whole operating range anti pinch protection plate, a yellow / Black diagonal stripe border warning strip, even rose to the highest in the large area, but also to ensure the side of the side plate is completely closed, which can effectively avoid the risk of a bruised toe, can make the person, forklift, goods with full protection.

Product structure and technical performance:

1. platform structure

The overall platform surface structure design is adopted, and the surface is made of high strength decorative checkered plate. The bottom frame of the panel adopts the unique I steel support structure, which can effectively decompose the distribution of force and reduce the torsion of the frame, so it is more durable.

2. telescopic small pull structure

The standard small wrench is made of high tensile drawing steel plate; the telescopic small plate is pushed by an independent small oil cylinder; the operation is simple and the operation is smooth.

3. open base

The open base structure is easy for pit cleaning and routine maintenance.

4. power unit

The utility model is composed of an integral hydraulic system and a hydraulic pump station, and is arranged on the base of the unloading platform, and the installation position is higher than the plane of the pit, and the utility model is far away from garbage and sundries.

5. power configuration

We offer two power configurations for customers to choose from: 380V/50Hz/0.75Kw and 220V/50Hz/1.1Kw, all equipped with built-in anti overload motors.

6. in one hydraulic system

The inner diameter of the two main cylinders is 63mm (2-1/2), and the inner diameter of the auxiliary cylinder is 50mm (2). Suitable for 40 degrees Celsius (100 degrees Fahrenheit) ambient temperature. The single pipe connection prolongs the life of the fully sealed hydraulic system and hydraulic pump station and reduces maintenance costs.

7. independent outrigger structure

28 tons of patented design (60600lbs.) support leg structure in unloading process, when the truck suddenly left the platform unloading area, the supporting legs can make goods and keep the forklift in the horizontal plane, to minimize accidents and guarantee the safety of operators.

8. anti pinch foot design

The unloading platform on both sides of the whole operating range anti pinch protection plate, a yellow / Black diagonal stripe border warning strip, even rose to the highest in the large area, but also to ensure the side of the side plate is completely closed, which can effectively avoid the risk of a bruised toe, can make the person, forklift, goods with full protection.

Optional configuration:

1., according to customer requirements for design and manufacturing.

The 2. can provide integrated control systems, matching the industrial door or fast door of the industrial ladder, and achieving interlocking.

The 3. sides can be provided with rubber strips and brush seals to ensure the overall sealing performance of the height adjustment plate.

4., rubber shock block can be configured, laminated anti-collision blocks.